Saturday, November 2, 2019

Broodstock Managment and larval rearing Essay Example | Topics and Well Written Essays - 1750 words

Broodstock Managment and larval rearing - Essay Example In this system, water exists through the centre of the tank by gravity and is then through bag filters of sizes 300 um for filtration before going through a sump that maintains the levels of water. After this, system water is then pressurized by 2-hp pump through a glass media filter that is capable of trapping and retaining particles of up to 5um, and then passed through a UV filter followed by a 8-hp heat pump temperature control before going back to the maturation tank (Benetti et al, 2010). Approximately 25% of the pressurized, flowing water is passed through a side loop made up of a trickle biofilter and a foam fractionators before going back to the maturation tanks (Benetti et al, 2010). Biological control for ecto-parasites that may affect the broodstock during maturation in the maturation tanks is very important. Neon Gobies (Gobiosoma oceanops) is often stocked together with broodstock fish as a cleaner fish. Research has shown that Neon gobies has been successfully used to prevent ecto-parasites in maturation tanks with mutton snapper, and greater amberjack, thus its interaction with cobia adults may be helpful in maintaining broodstock cobia (Benetti et al, 2010). Diet used for feeding broodstock is made up of artificial formulated feeds as well as squid, sardines and no lesser degree shrimp. This should consist of about 3-5% of biomass daily. Mineral and vitamin supplements are also given to the broodstock daily especially when frozen feed is used mainly to compliment any possible nutritional deficiency that may arise from frozen feed (Benetti et al, 2010). To obtain spawns, the environmental conditions upon which broodstock is kept is manipulated especially the water temperature. As stated by Aquaculture Research (2008), all spawns occurred naturally at a temperature of 24-300C during the natural reproduction season extending from April to march yearly. Trials have indicated that females can

Thursday, October 31, 2019

The Crucible Essay Example | Topics and Well Written Essays - 1250 words - 1

The Crucible - Essay Example The Crucible explored this theme in the context of the 1692 Salem Witch trials. A man called Senator Joe McCarthy began McCarthyism, who exploited the American fears about Communism and managed to create a national campaign against Communists. McCarthy was gradually brought into disrepute and in 1954 he was removed as Chairman of the Committee after it was proved that he and his associates had been falsifying evidence. However, the witch-hunt continued for a few years and Arthur Miller himself was called in front of the committee in 1956. Miller refused to give the names of friends who might have been interested in Communism. As a result Miller was fined for contempt of Congress. Miller related McCarthyism and the witchcraft in Salem because in both circumstances, innocent people were punished. Miller is widely proclaimed as a moral writer whose aim is to bring out the good in man rather than bad. Through his play, The Crucible, he attempted with the problem of evil in the man and to provide a solution to this problem. Miller can argue in this way as he believes that all men have a basic concept of what is good in their minds. Through his play, he attempts to bring out this basic goodness in people by shocking them with evil. The writer presents most of the people in his play as being land grabbing, superstitious, vindictive, revengeful, cowardly, adulterous and downright evil. This makes the plot more of a battle between good and bad, both internal and external to man. The battle between good and evil has always been gripping to the mankind from ages. Miller uses this simple philosophy and blends it American history to create the play, The Crucible. The play, The Crucible, is divided into 4 acts, completely different from each other, yet have a realistic connection. Miller's style is very simple He uses simple sentence structure with a simple vocabulary, but makes sure that the suspense in the plot is not taken away. He makes the plot and idea interesting by foreshadowing future events. At the end of first act, two different scenes of Betty's room and the discussion of Procter and Abigail are left incomplete and make the audience guessing. At the end of second act, the good name of Procter in the society is kept at stake for the life of Elizabeth, wife of Procter. This creates the tension in the play, which is sustained at the end of third act also. Sentenced for death, Procter's character is put to the ultimate test. The tension is created in these waves. Each time the atmosphere is calm, it makes audience anticipate a climax. But at the end of each act, there is hysteria. There is no real break-through, but a twist in the story. Tension in the play is sustained by swinging the play from one end to other. Betty is lying unconscious on the bed within a few moments, the room is full of people and very soon, they are all shouting and arguing. Because there are so many people coming and going, this creates a sense of confusion. Miller does this because he wants the audience to feel a little of the same confusion as the characters in the play Miller makes the characters speak at different speeds sometimes quick, sometimes slow, which creates tension, it sounds more realistic. Miller sometimes has the characters i

Tuesday, October 29, 2019

The Role of the State in the Marxist Point of View Essay

The Role of the State in the Marxist Point of View - Essay Example For further clarification and exploration, it will also compare Marx's ideal government with that of the Luddites and utopian socialists. The paper will conclude with its findings. The Communist Manifesto which was published in 1848 documents the struggle of two major opposing social classes-the bourgeoisie and the proletariat. According to Marx (1), bourgeoisie refers to the "class of modern capitalists, owners of the means of social production and employers of wage-labour" while proletariat refers to the "class of modern wage-labourers who, having no means of production on their own, are reduced to selling their labor power in order to live." In order to fully understand the role of the government in the societal context of Marx, this paper will first look at the social structure and their implications in the society. The power struggle between these two social classes is justified by their opposing interests. The proletariat is portrayed as a utility maximizing entity because he seeks to maximize the value of his resource, his labor power, in return for higher wages. The bourgeoisie, on the other hand, is a profit maximizing entity because he seeks to minimize the cost of production by keeping wages for workers low (Marx 2). It should be noted that in Marx society, costs of production are allocated to fixed costs such as rent and interest. Wages, being the most variable and controllable, is kept at minimum. The bourgeoisie also aims to generate the most efficient productivity from the proletariat as this will also increase his profits. In this case, we see an antagonistic and contradictory relationship between the working class and the owners of capital. Therefore, in Marx's definition of proletariat, we see that the working class is portrayed as an exploited segment of the society. The relation ship between the two major classes also documents that power is concentrated on the hands of those who own the means of production. The working class, as implied by the definition of Marx (7), is seen by the bourgeoisie as a factor of production together with land and capital: "He becomes an appendage of the machine, and it is only the most simple, the most monotonous, and most easily acquired knack, that is required of him." This view of the society emphasizes the presence of social equality. The bourgeoisie uses their access of capital in order to exploit the proletariat. In this context of Marxist capitalist society, the state appears to be instrumental in preventing the existence of social equality. Marx recognizes that the state is mainly "a product and a manifestation of the irreconcilability of class antagonisms" (Lenin 2). When the struggle between classes in the society cannot be objectively reconciled, the state is created. Conversely, the existence of the state is a manifestation that the class antagonisms in the society cannot be reconciled. Thus, the state only comes into existence when the society is divided on class lines. As the creation and existence of the state is due to the antagonism between two social classes, the state in the Marxist context is created for a certain function that is, the resolution of the class struggle. It is, then, the utmost goal of the government to serve the interest of both parties and

Sunday, October 27, 2019

Effect Of Vibration On Solder Joint Reliability Engineering Essay

Effect Of Vibration On Solder Joint Reliability Engineering Essay CHAPTER 01 INTRODUCTION SOLDER JOINT IN ELECTRONIC ASSEMBLIES Circuit boards range from simple single moulded plastic boards with copper conductors on one or both sides to multilayer boards with copper conductors, each layer being separated by a dielectric and interconnected by metal conductors. Minimum line width and spacing between lines is less than 100  µm. The board typically is made from a composite such as an epoxy with layered sheets of woven fibreglass. The dielectric material between layers of conductors is usually a polymer, for example polyimide. To maintain solder ability, the exposed copper may be coated with an inhibitor such as benzotriazole or with a solder overcoat. Components are attached to the board with solder or metal-filled conductive adhesives. Fully assembled boards may be further protected against moisture, contamination, and mechanical damage by a cover coat. 1.2 SOLDER JOINT RELIABILITY AND FAILURE Solder joints are widely used in the electronic packaging industry to produce good electrical, thermal, and mechanical connections between the package and the printed circuit board. Eighty percentage of the mechanical failure in airborne and automation electronic caused by vibration and shock. Design appropriate measure to ensure the survival equipment in the shock and vibration environment is necessary to do so. Remaining 20 percentage of mechanical failure related to thermal stresses resulting from high thermal gradients, coefficient of thermal expansion and high coefficient of elasticity. Solder joint failure occur in several reasons: Poor design of the solder joint A bad solder joint treatment Solder material Excessive stress applied to solder joints. In general, however, the solder joint failure are simply ranked according to the ature of stress that have caused. Most joint failure fall into three major categories: Fatigue failure due to cyclic stress application Due to the implementation of a long term or permanent load The stress is due to overloading in the short term Reflow profile also has a significant role on solder joint reliablity. because It also has a high influence micro structure of the solder joint. Vibration failure of solder joints is often assessed for reliability using high accelerated life test, which is represented by a GRMS- time curve. For surface mount microelectronic components, an approximation of printed circuit board (PCB) model analysis can be made by assuming PCB as a bare unpopulated thin plate because the increase in stiffness of PCB due to the mounting of the components is approximately offset by the increase in total mass of the populated PCB [2]. However, this approximation can lead to errors in natural frequency prediction for different package profiles, for flip-chip-on-board (FCOB) and plastic-ball-grid-array (PBGA) assemblies [3,4]. When the component has small profile, the approximation of PCB assembly as a bare PCB can provide satisfactory modal analysis results because the stiffness and mass contribution of small component to PCB assembly is not significant. In this study, varying G-level random vibration tests for PCB assembly were conducted. In order to assess the reliability of PCB assembly, it is necessary to conduct the dynamic analysis. A global-local modeling approach [4-6] was used. The analyses by Basaran [7,8], Chandaroy [9] and Zhao et al. [10] show that solder joint deformation is in the elastic range for vibration loading. The global-local or submodeling method [11-13] has been used for the board level FE simulation. In this study, four different model cases were investigated for FEA modal analysis to calculate the first order natural frequency of the FCOB assembly. A quasi-static analysis approach was conducted for the FCOB assembly to evaluate the stress strain behavior of the solder joints. A harmonic analysis was also investigated to study the dynamic response of the FCOB assembly subjected to vibration load. Fatigue life prediction results from the quasi-static analysis and harmonic analysis approaches were compared to the test results. 1.3 PROJECT PURPOSE In this modern world due to the causes of health and environmental issues the electronic manufacturing industries facing a challenging problem of necessity to produce reliable solder products in very high density with very low cost. Solder joints are very important to the reliability of Printed Circuit Boards (PCB). This is a one of the leading factor in transmission of electrical and thermal connections. In case of every PCB even a smaller solder joints are very important. So this project investigates the Effect of Vibration on Solder Joint Reliability in Electronics Assembly Applications. Solder joint of a Electronic assembly is very important measurement because of This model based study might help engineers effectively improve the PCB mechanical design and thus improve reliability of electronics attached to the PCB by considering realistic uncertainties and adverse vibration environments. CHAPTER 02 LITERATURE REVIEW 2.1 SINE ON RANDOM VIBRATION TESTING Vibration sine on random testing is performed by superimposing a sine wave on top of a random environment. A sine on random vibration test duplicates the combined environment of a spinning helicopter blade with its distinct resonant levels and the rest of the aircraft which generates random engine and aerodynamic induced vibration. Gunfire on board an aircraft causes sine vibration while the rest of the aircraft generates random excitations. These types of tests are duplicating vibration characterized by dominant peaks (sinusoids) superimposed on a broadband background Another variation would be a swept sine on random test. 2.2 SINUSOIDAL VIBRATION TESTING Dynamic deflections of materials caused by vibration can cause a host of problems and malfunctions including failed electrical components, deformed seals, optical and mechanical misalignment, cracked or broken structures, excessive electrical noise, electrical shorts, chafed wiring. Because sine vibration is basically a certain fundamental frequency and the harmonics of that fundamental, in its pure state, this type of vibration is generated by a limited but significant number of sources. Expressed as amplitude versus frequency, sine vibration is the type of vibration generated in the field by sources such as engine rotational speeds, propeller and turbine blade passage frequencies, rotor blade passage and launch vehicles. While much of real world vibration is random, sine vibration testing accomplishes several important goals in product qualification and testing. Much material and finished product was modeled on some type of sine vibe signature. A sine sweep of frequencies will determine whether the assumptions were correct and if the deviations are significant enough to cause design changes. In other words, sweep will establish if the anticipated frequency has been met and/or discovers the test item fundamental frequency. Similarly, a sweep will help identify the test subject resonance frequencies, which may be the points at which the item experiences particularly stressful deflections. By dwelling at those frequencies in subsequent tests, premature failures due to the properties of the material may come to light before the items sees field use. Some of the following tests include fixed frequency at higher levels of the controlling variable (displacement, velocity, acceleration), and random vibration . Per customer request, NTS will run sweeps in one direction, decreasing, increasing or bi-directionally and can change frequency logarithmically or linearly. Another typical sinusoidal vibration test, sine burst such as the teardrop, goes rapidly to peak pulse and then decays at lower rate (to prevent damage to the unit). The burst test puts a maximum load into an article at a rapid rate and particularly stresses joints and seams to identify workmanship and design issues. 2.3RANDOM VIBRATION TESTING The legitimacy of random vibration s an effective tool of screening work man ship defects came about during manufacturing. Up until that limited hertz sine was applied during reliability testing. Pure sinusoidal vibration is composed of a single frequency at any given time. Comparisons tests revealed that to equal the effectiveness of random vibration. The test item will have to be subjected to many sine frequencies over a longer period of time, and may unintentionally fatigue the test item. Random vibrations undercover defect faster. 2.4 Real world simulation. Most vibration in real world is random for example a vehicle travelling over road experience random vibration from the road irregularities. A ground launched rocket vehicle experiences non stationary vibration during its flight the motor ignites the rocket travel through the atmosphere , the motor burn ends and so forth even in wing when subjected to turbulent air flow, undergoes random vibration. Random vibration is composed of multitude of continues spectrum of frequencies. Motion varies randomly with time. It can be presented in the domain by a power spectral density function [G2/Hz]. HIGHLY-ACCELERATED LIFE TESTING (HALT) Exposes the product to a step-by-step cycling in environmental variables such as temperature, shock and vibration. HALT involves vibration testing in all three axes using a random mode of frequencies. Finally, HALT testing can include the simultaneous cycling of multiple environmental variables, for example, temperature cycling plus vibration testing. This multi-variable testing approach provides a closer approximation of real-world operating environments. Unlike conventional testing, the goal of HALT testing is to break the product. When the product fails, the weakest link is identified, so engineers know exactly what needs to be done to improve product quality. After a product has failed, the weak component(s) are upgraded or reinforced. The revised product is then subjected to another round of HALT testing, with the range of temperature, vibration, or shock further increased, so the product fails again. This identifies the next weakest link. By going through several iterations like this, the product can be made quite robust. With this informed approach, only the weak spots are identified for improvement. This type of testing provides so much information about the construction and performance of a product, that it can bequite helpful for newer engineers assigned to a product with which they are not completely familiar. HALT testing must be performed during the design phase of a product to make sure the basic design is reliable. But it is important to note that the units being tested are likely to be hand-made engineering prototypes. At Trace, we have found that HALT testing should also be performed on actual production units, to ensure that the transition from engineering design to production design has not resulted in a loss of product quality or robustness. Some engineers may consider this approach as scientifically reasonable, but financially unrealistic. However, the cost of HALT testing is much less than the cost of field failures HIGHLY-ACCELERATED STRESS SCREENING (HASS) HASS testing is an on-going screening test, performed on regular production units. Here, the idea is not to damage the product, but rather to verify that actual production units continue to operate properly when subjected to the cycling of environmental variables used during the HASS test. The limits used in HASS testing are based on a skilled interpretation of the HALT testing parameters. The importance of HASS testing can be appreciated when one considers todays typical manufacturing scenario. Circuit boards are purchased from a vendor who uses materials purchased from other vendors. Components and sub-assemblies are obtained from manufacturers all over the world. Often, the final assembly of the product is performed by a subcontractor. This means that the quality of the final product is a function of the quality (or lack thereof) of all the components, materials, and processes which are a part of that final product. These components, materials, and processes can and do change over time, thereby affecting the quality and reliability of the final product. The best way to ensure that production units continue to meet reliability objectives is through HASS testing. RELIABILITY Reliability is defined as the probability that a device will perform its required function under stated conditions for a specific period of time. Predicting with some degree of Confidence is very dependent on correctly defining a number of parameters. For instance, choosing the distribution that matches the data is of primary importance. If a correct distribution is not chosen, the results will not be reliable. The confidence, which depends on the sample size, must be adequate to make correct decisions. Individual component failure rates must be based on a large enough population and relevant to truly reflect present day normal usages. There are empirical considerations, such as determining the slope of the failure rate and calculating the activation energy, as well as environmental factors, such as temperature, humidity, and vibration. Lastly, there are electrical stressors such as voltage and current. Reliability engineering can be somewhat abstract in that it involves much statist ics; yet it is engineering in its most practical form. Will the design perform its intended mission? Product reliability is seen as a testament to the robustness of the design as well as the integrity of the quality and manufacturing commitments of an organization. One of the fundamentals of understanding a products reliability requires an understanding of the calculation of the failure rate. The traditional method of determining a products failure rate is through the use of accelerated vibration operating life tests performed on a sample of devices. The failure rate obtained on the life test sample is then extrapolated to end-use conditions by means of predetermined statistical models to give an estimate of the failure rate in the field application. Although there are many other stress methods employed by electronic assembly manufacturers to fully characterize a products reliability, the data generated from operating life test sampling is the principal method used by the industry for estimating the failure rate of a electronic assembly in field service. Failure Rate (ÃŽÂ ») Measure of failure per unit of time. The useful life failure rate is based on the exponential life distribution. The failure rate typically decreases slightly over early life, then stabilizes until wear-out which shows an increasing failure rate. This should occur beyond useful life. Failure In Time (FIT) Measure of failure rate in 109 device hours; e. g. 1 FIT = 1 failure in 109 device hours. Total Device Hours (TDH) The summation of the number of units in operation multiplied by the time of operation. Mean Time between failures (MTBF) Reliability is quantified as MTBF (Mean Time Between Failures) for repairable product and MTTF (Mean Time To Failure) for non-repairable product. A correct understanding of MTBF is important. A power supply with an MTBF of 40,000 hours does not mean that the power supply should last for an average of 40,000 hours. According to the theory behind the statistics of confidence intervals, the statistical average becomes the true average as the number of samples increase. An MTBF of 40,000 hours, or 1 year for 1 module, becomes 40,000/2 for two modules and 40,000/4 for four modules. Sometimes failure rates are measured in percent failed per million hours of operation instead of MTBF. The FIT is equivalent to one failure per billion device hours, which is equivalent to a MTBF of 1,000,000,000 hours. The formula for calculating the MTBF is ÃŽÂ ¸ = T/R. ÃŽÂ ¸ = MTBF T = total time R = number of failures MTTF is stands for Mean Time To Failure. To distinguish between the two, the concept of suspensions must first be understood. In reliability calculations, a suspension occurs when a destructive test or observation has been completed without observing a failure. MTBF calculations do not consider suspensions whereas MTTF does. MTTF is the number of total hours of service of all devices divided by the number of devices. It is only when all the parts fail with the same failure mode that MTBF converges to MTTF. ÃŽÂ ³= T/N ÃŽÂ ³ = MTTF T = total time N = Number of units under test. If the MTBF is known, one can calculate the failure rate as the inverse of the MTBF. The formula for (ÃŽÂ ») is: where r is the number of failures. Once a MTBF is calculated, probability can derive from following equation: R(t) = e-t/MTBF Confidence Level or Limit (CL) Probability level at which population failure rate estimates are derived from sample life test. The upper confidence level interval is used. Acceleration Factor (AF) A constant derived from experimental data which relates the times to failure at two different stresses. The AF allows extrapolation of failure rates from accelerated test conditions to use conditions. Since reliability data can be accumulated from a number of different life tests with several different failure mechanisms, a comprehensive failure rate is desired. The failure rate calculation can be complicated if there are more than one failure mechanisms in a life test, since the failure mechanisms are thermally activated at different rates. Equation 1 accounts for these conditions and includes a statistical factor to obtain the confidence level for the resulting failure rate. THE BATHTUB CURVE The life of a population of units can be divided into three distinct periods. Figure 1 shows the reliability bathtub curve which models the cradle to grave instantaneous failure rates vs. time. If we follow the slope from the start to where it begins to flatten out this can be considered the first period. The first period is characterized by a decreasing failure rate. It is what occurs during the early life of a population of units. The weaker units die off leaving a population that is more rigorous. This first period is also called infant mortality period. The next period is the flat portion of the graph. It is called the normal life. Failures occur more in a random sequence during this time. It is difficult to predict which failure mode will manifest, but the rate of failures is predictable. Notice the constant slope. The third period begins at the point where the slope begins to increase and extends to the end of the graph. This is what happens when units become old and begin to fail at an increasing rate. Reliability Predictions Methods A lot of time has been spent on developing procedures for estimating reliability of electronic equipment. There are generally two categories: (1) predictions based on individual failure rates, and (2) demonstrated reliability based on operation of equipment over time. Prediction methods are based on component data from a variety of sources: failure analysis, life test data, and device physics. For some calculations (e.g. military application) MIL-HDBK-217 is used, which is considered to be the standard reliability prediction method. A simple failure rate calculation based on a single life test would follow equation 1. ÃŽÂ »Ã¢â€š ¬Ã‚  = failure rate. TDH = Total Device Hours = Number of units x hours under stress. AF = Acceleration factor, see Equation 3. Since reliability data can be accumulated from a number of different life tests with several different failure mechanisms, a comprehensive failure rate is desired. The failure rate calculation can be complicated if there are more than one failure mechanisms in a life test, since the failure mechanisms are thermally activated at different rates. Equation 1 accounts for these conditions and includes a statistical factor to obtain the confidence level for the resulting failure rate where, ÃŽÂ » = failure rate in FITs (Number fails in 109 device hours) ÃŽÂ ² = Number of distinct possible failure mechanisms k = Number of life tests being combined xi = Number of failures for a given failure mechanism i = 1, 2, ÃŽÂ ² TDHj = Total device hours of test time for life test j, j = 1, 2, k AFij = Acceleration factor for appropriate failure mechanism, i = 1, 2, k M = ÃŽ2 (ÃŽÂ ±, 2r +2) / 2 where, ÃŽ2 = chi square factor for 2r + 2 degrees of freedom r = total number of failures (ÃŽÂ £ xi) ÃŽÂ ± = risk associated with CL between 0 and 1. 2.2 SOLDER PASTE 2.1.1 ROLE OF SOLDER PASTE IN REFLOWING Solder paste is a combination mixture of a flux composition and a highly grinded, powdered solder metal alloy that is normally used in the electronics industry to soldering processes. And also it is call as a attachment medium between the device interconnection features and the PCB itself. The components of a solder paste are specially designed for excellent printing and reflow characteristics. In normal case of the surface mount soldering process involves placing the substrate and a small amount of solder paste in a printed circuit board. After that the system will be heated until the solder reflows, forms an electrical connection between the solder pad and the electrical contact of electronics part. After this reflow finished it forms both an electrical and mechanical connection between the electronics components and the printed circuit board. 2.1.2 SELECTION CRITERIA OF A SOLDER PASTE Selection of a solder paste is very important factor for reflowing process, reliability its quality. The following factors are considerable for a good solder paste [6]. The size of the solder alloy particles which are in the solder paste The tendency to form voids The properties of the flux medium of the solder paste Alpha particle emission rate The design of the stencil to be used for printing Thermal properties of the solder paste Electrical properties of the solder paste CHAPTER 03 EXPERIMENTS 3.1 MATERIALS AND METHODOLGY SOLDER PASTE Basically I used solder paste in same procedure. The details of solder paste used in the experiment are given in the following table TYPE OF SOLDER PASTE ALLOYS CODING PARTICLE SIZE METAL LOADIND S1 Sn95.5Ag4Cu0.5 S2 Sn42Bi57Ag1 Table 3.1.1 types of solder paste used in experiment For this project all above solder paste should be in a container with appropriate labelling and identification on it to distinguish it from the Tin lead solder paste. The solder paste should be stored in a refrigerator between 35 45 F. and should be allowed to come room temperature for minimum four hours before doing the solder paste printing. Once it has finished the using solder paste must replace to the refrigerator since it can not be at room temperature over 24 hours. The self life of the lead free solder pastes may be reducing from the typical six month. The above guidelines are strictly followed in this project. Because it is not only for guarantee the quality of solder paste but also a good way to reduce the errors that may affect the final results of the project. SOLDER PASTE PRINTING IMPORTANT OF SOLDER PASTE PRINTING Surface mount technology (SMT) is used extensively in the electronics industry. Surface mount components are potentially more reliable products can be designed and manufactured using the SMT. The solder paste stencil printing process is very critical and important step in the surface mount manufacting process. Most of all the soldering defects are due to problems dealing with the screening process. So we want to a major consideration in operation and set up steps in stencil printing process. When we are monitoring these factors carefully we can minimize the defects. The main purpose of printing solder paste on PCB is to supply solder alloy to solder joint to correct amount. That only print must be aligned correctly and can get a perfect component placement. PRINTING PROCESS PARAMETERS Some of the following parameters are very important to printing process. STENCIL Stencils are using for the solder paste slip easily off the aperture edges and thereby secures a uniform print. For this process we using electro formed stencils. Because of these stencils have very shape edge and slightly conic. Generally a stencil is mading from cupper or nickel [12]. ENVIRONMENTAL Dust and dirt from the air that will reach the PCBs and stencils can be defects poor wet ability in the reflow soldering process. So PCBs should be stored in sealed packages and cleaned before use. SOLDER PASTE Solder paste characterise must be controlled to achieve a maximum production results. Some of the factors are given below [12]. Percent of metal Viscosity Slump Solder balls Flux activity working life and shelf life STENCIL PRINTING PARAMETERS Stencil printing parameters are very important factors in printing processes to achieve a best yield. The following parameters must be monitors and controlled in a printing process. Squeegee pressure = 8kg Squeegee speed = 20 mm/s Separation speed = 100% Printing gap = 0.0 mm These factors and limit can be adjust for our project purpose SOLDER PASTE PRINTING EQUIPMENT AND PROCESS Figure 3.2.4.1 DEK 260 stencil printing machine The DEK 260 stencil printing machine is used to print solder paste on the circuit board. This DEK 260 stencil printing machine has two main functions. Registers the position of the product screen with in the print head Positioning the circuit board below the stencil, to ready for the print cycle. The boards to be print are supported on magnetic tooling and held by vacuum caps arranged on the plate to guarantee the board steady during the printing on to the board. The first step of the experiment is to do the solder paste printing on to the board. In this project unable to get metal stencil, so circuit boards are printed by hand, below procedure followed to print PCB Put weights onto the stencil to fix it roll the squeegee over the stencil solder paste presses through the aperture onto PCB separate stencil two circuit boards are printed with solder paste for each solder paste types. Totally 4 circuit boards printed. SOLDER PASTE REFLOWPROCESS/PROFILE Figure 3.3.1 reflow oven To achieve a good reliable solder joint the reflow process is very important. When doing the reflow with sn-pb solder paste often performed at minimum peak temperature of about 203. It is 20k above the sn pb liquid state temperature. When doing the reflow process with lead free solder paste it has to be performed at a minimum peak temperature of 230. It is just 13K above the melting temperature. It is generally accepted that lead free solders requires a higher reflow temperature up to 220 230. Reflow profile will be affecting the reliability of a solder joint. Because it is a major factor that influence the formation of the intermettallic layers in a solder joint. Intermettalic layer is a critical part of a solder joint. An intermettalic bond thickness should be thin. Therefore a good reflow profile must produce solder bumps with a thin intermetallic layer. PREHEAT ZONE In this zone indicates how the temperature is changing fast on the printed circuit board. The ramp-up rate is usually between 1-3 per second. If this rate exceeds there will be damage to components from thermal shock. Only In this preheat zone the solder paste begins to evaporate. So if the rise rate is too low the evaporation of flux is not incomplete. This will affect the quality of the solder joint. THERMAL SOAK ZONE It is also called the flux activation zone. In this thermal soak zone it will take 60-120 seconds for removal of solder paste and activation of fluxes. Solder spattering and balling will be happen if the temperature is too high or too low. End of this thermal shock zone a thermal equilibrium will complete the entire circuit board. REFLOW ZONE In this reflow zone only the maximum temperature will be reached. In this zone we have to consider about the peak temperature that is the maximum allowable temperature of entire process. It is very important to monitor this maximum temperature exceeds the peak temperature in this zone. It may cause damage to the internal dies of SMT components and a block to the growth of intermetalic bonds. we have to consider the profile time also. If time exceeds than the manufactures specification it also affect the circuit boards quality. 3.3.4 COOLING ZONE In the reflow process the last zone is cooling zone. A proper cooling inhabits excess intermetallic formation or thermal shock to the components. Generally the cooling zone temperature range is 30 100. In this project I selected the following temperature profiles. This temperature profile is stranded reflow profile for lead free soldering. Zone 1 220 Zone 2 180 Zone 3 170 Zone 4 190 Zone5 233 Zone 6 233 Totally 4 circuit boards were printed. Choosing of good reflow profile was not involves any defects or damages in the printed circuit board. Figure 3.3.4.1a printed circuit board after reflow SET UP EVENT DETECTOR The constructed PCBs were connected with event detector by ribbon data cable. Ribbon cable addressed according to `Analysis tech STD series event detectors manual . pins 1 to 32 function as source point and pins 33 to 37 function as ground point. To obtain closed loop circuit to monitor the behaviour of PCB components, PCB boards 1, 2, 3 and 4 connected to channel 1,2,33 and 34 respectively. Ribbon cable After connected ribbon cable with event detector and enviromenrt chamber, channels are assigned in WIN DATA LOG software which supplied with event detector. For this test following settings define for data acquisition INVESTICATING RELIABILITY OF SOLDER JOINT UNDER VIBRATION CHAMER In this study, PCBs were used in Variable Frequency Vibration Test to analyse the dynamic response of PCB assembly subjected to random vibration loading. The PCB specimens were tested at different acceleration levels to assess the solder joint reliability subjected varying G-level vibration loads(G is the gravitational acceleration), respectively. Vibration tests were accomplished by using an electro dynamic Shaker

Friday, October 25, 2019

James Joyces Araby - The Lonely Quest in Araby Essay -- Joyce Dubline

The Lonely Quest in "Araby"  Ã‚        Ã‚  Ã‚  Ã‚  Ã‚   Universality of experience makes James Joyce's "Araby" interesting, readers respond instinctively to an experience that could have been their own. It is part of the instinctual nature of man to long for what he feels is the lost spirituality of his world. In all ages man has believed that it is possible to search for and find a talisman, which, if brought back, will return this lost spirituality. The development of theme in "Araby" resembles the myth of the quest for a holy talisman. In "Araby," Joyce works from a "visionary mode of artistic creation"-a phrase used by psychiatrist Carl Jung to describe the, â€Å"visionary" kind of literary creation that derives its material from â€Å"the hinterland of man's mind-that suggests the abyss of time sepa-rating us from prehuman ages, or evokes a superhuman world of con-trasting light and darkness. It is a primordial experience, which sur-passes man's understanding and to which he is therefore in danger of succumbing." 1 Assuredly this describes Joyce's handling of the material of "Araby." The quest itself and its consequences surpass the understanding of the young protagonist of the story. He can only "feel" that he undergoes the experience of the quest and naturally is con-fused, and at the story's conclusion, when he fails, he is anguished and angered. His "contrasting world of light and darkness" contains both the lost spirituality and the dream of restoring it. Because our own worlds contain these contrasts we also "feel," even though the primordial experience surpasses our understanding, too. It is true, as a writer reminds us, that "no matter the work, Joyce always views the order and disorder of the world in terms of the Catholic faith... ...world of North Richmond Street. Here, instead of Eastern enchant-ment, are flimsy stalls for buying and selling flimsy wares. His grailhas turned out to be only flimsy tea sets covered with artificial flow-ers. As the upper hall becomes completely dark, the boy realizes thathis quest has ended. Gazing upward, he sees the vanity of imagininghe can carry a chalice through a dark throng of foes. 1 Carl G. Jung, Modern Man in Search of a Soid. trans. W. S. Dell and CaryF. Baynes (New York, 1933), pp. 156-157. 2 William Bysshe Stein, "Joyce's 'Araby': Paradise Lost," Perspective, X11,No. 4 (Spring 1962), 215. 3 From Letters of James Joyce, Vol. II, ed. Richard Ellmarm (New York,1966), p. 134. 4 James Joyce, Stephen Hero (New York, 1944), pp. 210-211. 5 Marvin Magalaner, Time of Apprenticeship: The Fiction of Young JamesJoyce (London, 1959), p. 87.   

Thursday, October 24, 2019

Define the Role of the Nurse – 500 Words

This assignment will define the role of the nurse in healthcare and outline the different qualities required for this profession. Berridge and Liddle (2010) demonstrate that the definition of nursing according to the Royal College of Nursing (RCN) is â€Å"the use of clinical judgement in the provision of care to enable people to improve, maintain, or recover health, to cope with health problems and to achieve the best possible quality of life,whatever their disease or disability, until death. †A nurse is an individual who understands and respects their patients as individuals and does not judge them regardless of differences in morals or beliefs. It is essential that the ill and vulnerable feel that a nurse is competent, will listen, support and guide them and keep sensitive, personal information confidential. Nurses have a duty to provide dignified care to patients whilst maintaining their professional behaviour at all times. Recently stories have dominated headlines when th ere is evidence of poor care.BBC News (2012) Campaign to show ‘skill and compassion' of nurses aims to show the reality of nursing on a daily basis, assisted with a short film. The intention of this film is to reassure the public of the professionalism, dedication and quality of care nurses provide to their patients, regardless of negative coverage occasionally portrayed by the media. A nurse needs to show empathy to patients by providing comfort, security and efficient delivery of treatment throughout recovery which can be an emotional and sometimes a traumatic experience for both parties.It is also vital for nurses to adopt excellent communication skills, especially speaking and listening. As Davies (2012,p. 69) explains, communication skills are essential for understanding patients and putting them at ease. By using reflective skills, showing interest and asking appropriate questions, the relationship between the nurse and the patient should ultimately strengthen through tr ust and reassurance. Nurses frequently face difficult decisions which require a motivational, supportive person to act as a leader to their colleagues. One of the most important qualities of nursing is being an effective team player.This means working together within the multidisciplinary team, constructively sharing ideas and evaluating and delivering the highest quality of care for patients. Nursing is a continuous lifelong learning profession which requires individuals to learn new clinical skills and to continue educating themselves throughout their career. Nurses should have an appropriate amount of knowledge regarding illnesses and medical conditions. This knowledge will enable the nurse to competently answer questions or concerns from patients and their families.Emory University ‘A touching experience' quotes from Maya Angelou on how nurses should be perceived: â€Å"As a nurse, we have the opportunity to heal the heart, mind, soul, and body of our patients, their fami lies and ourselves. They may forget your name, but they will never forget how you made them feel. † In past decades, conditions, policies and uniforms may have changed, however, the compassion, dedication and quality of care shown by many people as â€Å"angels without wings† continues to make a difference, however small it may be to peoples lives.References Anna,P. 2012 A touching experience. Atlanta, Georgia: Emory University. Available from: http://www. emorynursingnow. com/a-touching-experience/ (Accessed 11 October 2012). Davies,N. ,2012 Attention, courtesy and patience: how to talk to patients effectively. Nursing Standard, 27(4),p69. Berridge,P. And Liddle,C,2010. Fundamentals of Nursing made incredibly easy. Euradius, Netherlands: Lippincott, Williams & Wilkins Dreaper,J Campaign to show â€Å"skills and compassion† of nurses. BBC News, 17 September 2012. Available from: http://www. bbc. co. uk/news/health/19602792 (Accessed 10 October 2012).

Wednesday, October 23, 2019

Recommendation for Starbucks Coffee Company Essay

INTRODUCTION The purpose of this report is to conduct market analysis and recommend appropriate marketing strategies for Starbucks Coffee. In the report, we will first look into Starbucks’s goal, its product and markets. Then we will look into the key actions and decisions that lead to the success of the company. After that, we will discuss the issues that Starbucks is facing in this competitive global market. For each strategic issue, appropriate marketing recommendations for the company are made respectively. BACKGROUND AND SITUATION ANALYSIS Starbucks Coffee starts in 1971 with a single store in Seattle’s Pike Place Market. Today, they are privileged to welcome nearly 35 million customers on a weekly basis, in more than 12,000 stores around the world. (www.starbucks.com) Starbucks’s goal is to become the leading retailer and brand of coffee in each of its target markets by selling the finest quality coffee and related products and by providing each customer a unique â€Å"Starbucks Experience†. â€Å"Starbucks Experience† is a third place after home and work with superior customer service, clean and well maintained retail stores which reflect the personalities of the communities in which they operate. Starbucks strategy for expanding its retail business is to increase its market share mainly by opening additional stores in existing markets and to open stores in new markets. In support of this strategy, Starbucks opened 1,040 new company operated stores in fiscal 2006. (www.starbucks.com) During fiscal 2006, Starbucks Coffee Company operated retail stores accounted for 85% of total net revenues. (Starbucks Annual Report 2006) In addition to company operated stores, Starbucks works with certain carefully chosen  business to operate licensed stores in various places. Its strategy is to reach customers where they work, travel, shop and dine by establishing relationship with people that share the Company’s values and commitment to quality. These relationships take various forms, including licensing arrangements, foodservice accounts and other initiatives related to the Company’s business. Licensed and Foodservice stores can be found on college campuses. Customers can enjoy their Starbucks in select supermarkets, hotels and military bases throughout foodservice venues around the world. During fiscal 2006, specialty revenues accounted for 15% of total net revenues. (Starbucks Annual Report 2006) Starbucks also recently has strategically sold coffee and tea products through other channels such as supermarkets, or non-traditional retail channels such as United Airlines, Marriott International, Holland-American Cruise Line, and Department Stores. MARKET ANALYSIS To achieving growth and making profits, Starbucks started to go international since 1996. International connections can build a strong foreign presence which helps to increase brand recognition and also increase the domestic business. The more stores Starbucks has around the world, the more loyalty and familiarity can be built among its existing and potential customers. The following are the macro environmental variables which are likely to impact Starbucks when going international:- _GEOGRAPHICAL FACTORS_ Starbucks has carefully analyzed various strategies for the placement of its stores. They have developed cost-saving options for these stores to meet the need to adapt to each geographic region. They also need to consider the tastes and preferences of each area. For example, customers in New Orleans prefer their bagels toasted and those in Atlanta require more seating for a â€Å"social† coffee break. _DEMOGRAPHICAL FACTORS_ Starbucks begin in US, which is the sector we are examining for demographics. As of July 2005, the population of the U.S. was estimated at 295,734,134 (CIA World Factbook). Population facts are important to Starbucks because they can give Starbucks valuable statistics, such as US population base per Starbucks store. People ages 15-64 make up the largest percentage of the population (67%), and therefore will have greater control of the market than any other sector (CIA World Factbook). This implies that the most important target market for Starbucks are people within this age group. The two largest ethnic groups in the U.S. are white 81.7%, black 12.9% and Asian 4.2%. (CIA World Factbook) The ethnic background is important to a company because it influences tastes, trends, perceptions, values and beliefs of an individual. _ECONOMICAL FACTORS_ Estimated GDP in 2004 was $11.75 trillion. GDP real growth rate was 4.4% (CIA World Factbook). The growth rate of GDP suggests that the economy is growing, and therefore there is opportunity for Starbucks to expand business. A very large per capita purchasing power parity of $40,100 suggests that Americans have the opportunity to buy specialty coffee drinks from an expensive, quality-intensive organization such as Starbucks (CIA World Factbook). _3.4 TECHNOLOGICAL FACTORS_ Strategic issues that will challenge Starbucks in the future are related to their tight control and lack of flexibility, organizational structure, and diversification. First, Starbucks is vertically integrated as they buy and roast the beans, ship them to the stores, produce, and sell the coffee. They may face difficulties or have to raise the price of their coffee if the cost of raw beans increases, or there is a decrease in available labor. The second issue is that they are centralized around controlling all steps of the distribution process, entering into joint ventures which may lead to quality control issues in locations. Another issue is the ability for growth. Starbucks will continue to grow in their core business, but the more they spread into international and joint ventures they will face increased quality control problems. _3.5 POLITICAL AND LEGAL FACTORS_ The Los Angeles city council was considering an ordinance that would require licensing of coffeehouses open past midnight. This demonstrates how government exertion can prove unprofitable for the business. Furthermore, anti-trust laws might prevent Starbucks from future expansions, since the company is not owned locally as with other franchisers. Other human-rights activists or organizations can potentially voice their concerns about the business’s process, such as how the leaflets concerning under-paid Guatemalan eventually forces Starbucks to establish several codes for treatments of its foreign subcontractors. _SOCIAL CULTURAL FACTORS_ Nationalism and cultural differences may result in recurrent problems on resource availability, product quality consistency and costs, which effect adversely to foreign operations. For instance, due to its population and potential of growth, China represents a grate opportunity of market. In the past, coffee was considered as a Western bourgeois commodity in China and people are used to have tea instead. Coffee doesn’t go well with Chinese food and culture as well. Until recently, the market research shows the country’s coffee drinking has doubled in the past four years. (www.marketwatch.com/news) Nevertheless, it still only amounts to about one cup per person per annum and the brand typically is instant Nescafe. Starbucks strives to create a unique culture with a passionate interest in changing a simple commodity into an addictive gourmet delicacy and meet  individual market wants and needs without compromising Starbucks’s brand image and culture of the company. STRATEGY RECOMMENDATIONS Starbucks’s competence in the style of stores and creative coffee drinks has propelled it to the front among coffee retailers. Starbucks is not just stands for a cup of fresh and nice coffee. Starbucks is about the passion for the soul of people, quality product, excellent customer service and the experience and understanding of the culture of coffee. In the following paragraphs, we are going to analysis the 4Ps (i.e. Product, Price, Place and Promotion) of Starbucks, followed by appropriate marketing strategic recommendations. _PRODUCT_ Premium Product Strategy Starbucks has been committed to sourcing the highest quality coffees around the world. It only purchases coffees that have been grown and processed by suppliers who meet strict environmental, social, economic, and quality standards. Starbucks is well-known for its exceptionally high quality coffees, care in selection, and expertise in roast (www.starbucks.com). Broad Product Differentiation Depending upon competence and innovation, Starbucks establishes its long lasting and profitable competitive advantages by broadly differentiating its coffee and coffee related products. Brand Image Starbucks combines its merchandizing strategy with its marketing programs to create and reinforce a distinctive brand image for its coffees. The company’s brand image strategy is reflected in its product mix, producing,  and sales and educational materials. What Starbucks stands for is a good cup of fresh coffee and the recognized brand worldwide. Recommendations: It is undeniable that Starbucks has a competitive advantage when it comes to quality, especially when compared to other generic coffee commodity. However, in terms of convenience, despite arduous efforts to establish Starbucks at every corner, there are still more supermarkets than there are Starbucks bars. Realizing the potential for this convenience sector of the coffee market, Starbucks should actively pursuing substitutes that compete in these areas, for example a pre-packaged drinks or offer tea in its shops as a preemptive measure to fight off any teahouse looking to steal away the coffee drinkers. Sometime Asia can be mistakenly seen as one culture by outsiders. It can be true somehow, yet to be successful in the region. The countries in Asia are totally different when it comes to culture, value, religion, tastes etc. Many Asians prefer for tea especially in China, a county of devoted tea drinkers who do not take readily to the taste of coffee. Starbucks should set different strategies and approaches for each market to make Starbucks’s experience to be part of the culture. To meet local tastes or preferences, Starbucks can act local, for example, by introducing alcoholic beverage fro special happy hour set in some countries or region. Traditionally Korea and China are huge alcohol consuming culture as well as coffee. High margin of beer, wine or cocktail may help Strarbucks match local tastes and preferences, most importantly, can boost its revenue. _PLACE_ Site Selection Starbucks stores are normally gathered in high-traffic, high visibility locations. It takes more than just location to be successful. Attracting  customers to Starbucks happens by providing high quality coffee and creating inviting, comfortable places that are conveniently located. These places should be those that add to the spirit of each community. Store Expansion Starbucks expands its stores by entering new markets wherever the opportunity exists to become the leading specialty coffee retailer. By the year 2006, its current location totals 12,440 worldwide (www.starbucks.com) Recommendation From past experiences, customer loyalties cannot be stretched or transferred to a new product or channel in a short time. Starbucks should expect a gradually change on its customers’ purchasing power and habits. Eventually, the Internet may reconfigure how customers think of mass-market brands. But that shift will take years to unfold and company leaders need to manager the transition with great skills. Therefore, Starbucks needs to make some change on its current e-commerce strategy. First, it may add more value to its value chain by expending its website function as a communication tool to link its stakeholders such as customers, suppliers, management and employees. Second, consolidate the public relation function. Starbucks.com is not only a window for online business, but also a window for building the company’s image and reputation. Third, keep online business on core products but maintain the products diversification as a long-term strategy, and implement it by gradually introducing new products one at a time. Last, to strategic ally with .com companies to expend its selling channels. Starbucks can setup online chat room to facilitate communication among its stakeholders. It may also create free email accounts to further spread its fame and consolidate customers’ loyalty. In addition, it can gradually add indirect coffee related products into its online sales collection, such as coffee machine. It may also want to introduce some online coffee tour package to provide cheap travel tours or hotel accommodation. In order to increase sales, Starbucks may also ally with .com companies to promote its  products. For example, to sign a sell contract with yahoo.com to carry Starbucks’ products. _PROMOTION_ Starbucks doesn’t have much conventional advertising because it found that there is too much competition for consumers’ attention in TV, radio and print media. Starbucks usually picks one or two charities or events that reach the community it serves. This will inspire people inside and outside the company and reinforce the company’s value and image. Starbucks integrates its corporate culture with its surroundings. At all levels of the Company, Starbucks partners strive to be good neighbors and active contributors in the communities where they live and work. It’s part of the Starbucks culture. It is the goal of Starbucks to involve partners as decision-makers, volunteers, and leaders in the initiatives they support. Recommendation To be a real global company, Starbucks can participate in or support local events, helping education in developing countries or community activities so that it can enhance its public relationship with those international markets. In most Asian markets, once it is perceived as a true partner or caretaker, its growth strategy might work just as in US market. _PRICE_ Best value offering By pricing its coffee competitively with the prevailing high-end coffee prices, Starbucks represents an attractive combination of price, features, high quality, good service and other attributes customers find attractive. Recommendation The fact that Starbucks prides itself in customer service, providing the â€Å"Starbucks experience† for the customer, means that the business is mainly customer-oriented, and thus translates to a strong customer’s power. Nonetheless, the greater the importance of the product’s quality or services to the customers, as is the case with coffees, there is little extent to the buyers’ price sensitivity. This indicates that as long as Starbucks maintains quality products and superb customer-service, individual consumers are unlikely to be able to exert their buying powers. Therefore, it’s good for Starbucks to maintain its prevailing high-end coffee prices. CONCLUSION It is no doubt that Starbucks is one of the most successful company in the world. They used a simply strategy, â€Å"connecting links between treating employees with dignity and respect and producing a good product and services.† That was the major factors that differentiate Starbucks from others and bring the successful to Starbucks. The future of Starbucks, which is in a fast-growth phase, is apparently to be successful and promising. However, those keys of success may not be applicable to tomorrow’s environment and in global market. Defending and growing a competitive position requires firmly built strategies based on its unique, valuable and leading capabilities and resources, rather than the products and services themselves, proactively responding to ever changing internal and eternal environment to keep fending off its competitors. Although currently there are no formidable competitors for Starbucks leadership in both international and domestic markets, it should not take it for granted for good. Tomorrow’s destiny of Starbucks should depend on its strategic capability to preserve and sustain its strengths, offset weaknesses, avoid threats and capitalize on opportunities. If Starbucks would correctly identify and deal with the issues under current and near future circumstances, it could remain excited about further growth and continues to be prosperous. List of References http://www.starbucks.com/aboutus/investor.asp http://geography.about.com/library/cia/blcusa.htm (CIA World Factbook) http://www.marketwatch.com/news Sandhusen, Richard, 1994, Global Marketing, Hauppauge, New York. Cateora, Philip R., 1996, International Marketing, Irwin, Chicago. Peter J. Buckley, Fred Burton and Hafiz Mirza, 1998, The Strategy and organization of international business, Macmillan Press, New York. Masaaki Kotabe, Kristiaan Helsen, 1998, Global marketing management, John Wiley, New York. Bryan Lowes, Christopher Pass and Stuart Sanderson, 1994, Companies and markets, Oxford, UK. Starbucks Annual Report 2006 (2006). Starbucks Annual Report. Seattle,WA., Starbucks Coffee Company.